Model S-40
Height, working maximum 46 ft 14.2 m
Height, platform maximum 40 ft 12.2 m
Height, stowed maximum 8 ft 2 in 2.49 m
Horizontal reach, maximum 31 ft 8 in 9.7 m
Width 7 ft 6 in 2.3 m
Length, stowed 24 ft 3 in 7.39 m
Maximum load capacity 500 lbs 227 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 7 ft 3 in 2.2 m
Turning radius (outside) 15 ft 8 in 4.78 m
Turning radius (inside) 6 ft 8 in 2.03 m
Turntable rotation (degrees) Continuous
Turntable tailswing 34 in 86.4 cm
Controls 12V DC proportional
Platform dimensions, 4 foot
(length x width)
48 x 30 in 122 x 76 cm
Platform dimensions, 5 foot
(length x width)
60 x 30 in 152 x 76 cm
Platform dimensions, 6 foot
(length x width)
72 x 30 in 182 x 76 cm
Platform dimensions, 8 foot
(length x width)
96 x 36 in 244 x 91 cm
Platform leveling self-leveling
Platform rotation 160°
AC outlet in platform standard
Ground clearance 12.5 in 32 cm
Tire size, 2WD Industrial
front tires only 12.5L-16SL
rear tires only 12-16.5 NHS
Tire size, RT 12-16.5 NHS
Tire size, high flotation 33/16LL500
Fuel tank capacity 20 gallons 76 liters
Hydraulic pressure, maximum
(boom functions)
2600 psi 179 bar
System voltage 12V
Weight 12,320 lbs 5,588 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Maximum slope rating, stowed position, 2WD
Platform downhill 30% 17°
Platform uphill 15% 9°
Side slope 25% 14°
Maximum slope rating, stowed position, 4WD
Platform downhill 40% 22°
Platform uphill 40% 22°
Side slope 25% 14°
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Drive speed, stowed 4.8 mph
40 ft/11 sec
7.7 km/h
12.2 m/11 sec
Drive speed, raised or
extended – all models
0.7 mph
40 ft/40 sec
1.1 km/h
12.2 m/40 sec
Floor loading information
Tire load maximum 6,700 lbs 3,040 kg
Tire contact pressure 45 psi 3.2 kg / cm2
310 kPa
Occupied floor pressure 162 psf 791 kg / m2
7.76 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.