This Item Has Been Added to Your Quote.
TOOL & EQUIPMENT RENTALS
Browse our products and rent what you need.
S-65 GENIE LIFT
Rental Rates
Features
Model S-65
Height, working maximum 71 ft 21.6 m
Height, platform maximum 65 ft 19.8 m
Height, stowed maximum 8 ft 11 in 2.72 m
Horizontal reach, maximum 56 ft 2 in 17.1 m
Width 8 ft 2 in 2.49 m
Length, stowed 31 ft 2 in 9.5 m
Maximum load capacity 500 lbs 227 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 8 ft 2 in 2.5 m
Turning radius (outside) 18 ft 2 in 5.5 m
Turning radius (inside) 7 ft 9 in 2.4 m
Turntable rotation (degrees) Continuous
Turntable tailswing 4 ft 1.22 m
Controls 12V DC proportional
Platform dimensions, 6 foot
(length x width)
72 x 30 in 182 x 76 cm
Platform dimensions, 8 foot
(length x width)
96 x 36 in 244 x 91 cm
Platform leveling self-leveling
Platform rotation 160°
AC outlet in platform standard
Ground clearance, center 14 in 37 cm
Ground clearance, axle 13 in 33 cm
Fuel tank capacity 40 gallons 151 liters
Hydraulic pressure, maximum
(boom functions)
3000 psi 207 bar
System voltage 12V
Tire size 355/55D 625
Tire size, High Floatation 41/18LL x 22.5, 14 ply
Weight 25,045 lbs 11,360 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Maximum slope rating, stowed position, 2WD
Counterweight uphill 30% 17°
Counterweight downhill 10% 6°
Side slope 25% 14°
Maximum slope rating, stowed position, 4WD
Counterweight uphill 45% 24°
Counterweight downhill 30% 17°
Side slope 25% 14°
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Drive speed, stowed, 2WD 4.0 mph
40 ft/6.2 sec
6.4 km/h
12.2m/6.2 sec
Drive speed, stowed, 4WD 3.0 mph
40 ft/7.2 sec
4.8 km/h
12.2m/7.2 sec
Drive speed, raised or
extended – all models
0.7 mph
40 ft/40 sec
1.1 km/h
12.2 m/40 sec
Floor loading information
Tire load maximum 12,600 lbs 5715 kg
Tire contact pressure 70 psi 4.92 kg / cm2
483 kPa
Occupied floor pressure 275 psf 1341 kg / m2
13.5 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
